Two-Way Plastic Geogrid Product Introduction

Bi-directional plastic geogrids are made from polymers that are extruded, sheeted and perforated through a process followed by longitudinal and transverse stretching. The material has great tensile strength in both longitudinal and transverse directions, this structure in the soil can also provide a more effective force bearing and diffusion of the ideal interlocking system, adapted to a large area of permanent bearing foundation reinforcement.

Plastic Geogrid Uses:

Bidirectional tensile plastic geogrid is suitable for all kinds of embankment and roadbed reinforcement, slope protection, cave wall reinforcement, large airports, parking lots, wharf yards and other permanent bearing foundation reinforcement.

  1. Bidirectional geogrid is used to increase the bearing capacity of road (ground) foundation and prolong the service life of road (ground) foundation.
  2. two-way geogrid is used to prevent the road (ground) surface collapse or cracks, keep the ground beautiful and neat.
  3. bi-directional geogrid is used for construction convenience, time-saving, labor-saving, shorten the construction period, reduce the maintenance cost.
  4. Bi-directional geogrid is used to prevent the culvert from cracking.
  5. Bi-directional geogrid is used to enhance soil slope and prevent soil erosion.
  6. Bi-directional geogrid is used to reduce the thickness of bedding layer and save the cost.
  7. Bi-directional geogrid is used to support the stability of slope grass mats to green the environment.

Two-way plastic geogrid specification size:

Mesh size: the mesh size of two-way plastic geogrid generally refers to the size of the side length of the square in the grid. Commonly used mesh sizes are 25mm, 40mm, 50mm, 75mm, 100mm, etc.1

Plate thickness: the plate thickness of two-way plastic geogrid generally refers to the thickness of the single layer of the grille size. Commonly used plate thickness of 1.0mm, 1.2mm, 1.5mm, 2.0mm, etc..

Width: The width of two-way plastic geogrid generally refers to the width of the single layer of the grille. Commonly used widths are 1.0m, 1.2m, 1.5m, 2.0m and so on.

Length: the length of two-way plastic geogrid generally refers to the length of a roll of grating. Commonly used lengths are 25m, 30m, 50m, 100m and so on.

The specific model specifications are TGSG15-15, TGSG20-20, TGSG30-30, TGSG40-40, TGSG50-50 and so on.